How much does a 271 transfer case weigh?
NP 271 NV271 Dodge and Ford Transfer Case This heavy duty design is rated at gross vehicle weight of 17,500 lbs in vehicles with 5.3 L to 7.3 L diesels.
What is a NP271 transfer case?
The NP271 transfer case is chain driven with an aluminum casing, having two gears and a six pinion planetary gear set. It is used for heavier duty applications, such as the Ford F-Series, from the 250 and above, as well as the Ford Excursion.
How much oil does a NP271 hold?
Fluid capacity is listed in the service manual as 4 pints (2 quarts). Clean the area around the drain and fill plugs.
What transfer case is in a 2006 Ford f350?
Ford F-350 1999-2006 New Process Transfer Case NP271.
How heavy is a transfer case?
This transfer case is considered by most people to be nearly indestructible in most applications. The cast iron housing combined with beefy internals puts this case weight at nearly 140 pounds dry. High-range gearing is 1:1, and the NP205 has a low-range ratio of 1.96:1.
What type of fluid goes in a GM transfer case?
The fluid in the transfer case serves as both lubricant and helps to keep the internal components cool and turning smoothly….
| GMC/Chevrolet TRANSFER CASES | |
|---|---|
| Transfer Case Model | Fluid Type |
| BW4401 | ATF (Dexron III or higher) |
| BW4470 | ATF (Dexron III or higher) |
| BW4472 | ATF (Dexron III or higher) |
What transfer case is in a 2000 f350?
Ford F-350 2003-2010 Truck New Process Transfer Case NP273.
What transfer case is in 2004 f250?
Ford used New Venture NV271F manual shift transfer cases in 1999-2016 Super Duty 4x4s. The 1999-2010 transfer cases were built at the New Process Plant in Syracuse NY and use the industry standard, round, 6-bolt mounting flange and were available for both manual and automatic transmission equipped 4x4s.
How much does a NV5600 with transfer case weigh?
The forward gears are fully synchronized, this unit has an aluminum bell housing, with a cast iron case and extension housing, the shifer is top mounted. The NV5600 weighs 360 lbs. and is provided in both 2WD and 4WD.
What years did Ford use NP205?
Ford used driver-side front outputs and a divorced NP205 in its trucks from about 1972 to 1977, then changed to a six-bolt pattern married NP205 with a 31-spline female input through 1979.
What transfer case is in a 2000 f250?
Ford F-250 1999-2002 Truck New Process Transfer Case NP273.