Are there different size u-joints?
The driveline consists of a slip yoke, the shaft, a bolt-in yoke, and two or more U-joints….U-Joint Sizes.
| Series | Width | Cap Diameter |
|---|---|---|
| 1310 Big cap | 3.219″ | Two 1.062″, Two 1.125″ |
| 1330 Big cap | 3.622″ | Two 1.062″, Two 1.125″ |
| 1350 | 3.622″ | 1.188″ |
| 1410 | 4.188″ | 1.188″ |
What is the difference between 1310 and 1350 u-joints?
Size and strength. The 1310 series joint is what you would expect to find stock in most Jeep or small trucks. A 1350 series joint/shaft is what you might find in many full size trucks. While it’s not 100% accurate, you could say that a 1310 is a “half ton” joint and a 1350 is a “one ton joint”.
How wide is a 1350 U-joint?
Understanding U-Joints
| U-Joint Series | Width Center/Center | Torque Specifications |
|---|---|---|
| 1310/1330 | 1.416 in. | 14-17 Ft-Lbs |
| 1330 BC* | 1.590 in. | 14-17 Ft-Lbs |
| 1350/1410 | 1.666 in. | 20-24 Ft-Lbs |
How strong is a 1410 U-joint?
Driveshaft U-Joints
| Series | Max Angle | Max. Cont. Tq. |
|---|---|---|
| 1310 | 30 ° | 800 lbs-ft. |
| 1330 | 20 ° | 890 lbs-ft. |
| 1350 | 20 ° | 1,240 lbs-ft. |
| 1410 | 35-37 ° | 1,500 lbs-ft. |
How much torque can a 1310 U-Joint handle?
While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”
How strong is a 1350 U-joint?
Relying on information provided by the manufacturer of the components, our calculation is that the 1350 series joint is about 37.5-percent stronger than the 1310 series. The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque.
How much power can a 1350 U-Joint handle?
The 1330 has the same size caps as the 1310, but the U-joint cross is the same size as a 1350. The 1350 is rated at 1,240 lb-ft of continuous torque and 1,680 lb-ft of short-term torque.
Is Moog better than Spicer?
Frankly, there’s a very simple answer: If you drive a Jeep, I recommend you to go for Spicer joints. This specific U joint is the absolute best replacement part you can get for virtually all Jeep models. For most other vehicles – and especially light trucks or commuter cars, MOOG are an affordable and optimal solution.
What are universal joints on a car?
a universal joint, or u-joint, is an integral component used on many rear-wheel, four-wheel and all-wheel-drive vehicles. they are used in pairs and help make up for the difference in height between parts of the drivetrain. for instance, u-joints are commonly used to transmit power from the transmission to the rear differential on bigger vehicles, such as four-wheel drive trucks or suvs.
What are the types of universal joints?
Types of Universal Joint. There are two types of universal joints, defined by their number of bending joints: Single joint: has only one bending aspect and is capable of operating at up to a 45-degree angle. Double joint: utilizes two bending joints, the double u-joint can operate at angles up to 90 degrees. Additionally, it also accommodate
What is an universal joint typically used for?
– U-Joint Angles and Binding. – Front Axle U-Joints (Wheel Joints) Universal joints found in front steering axles of 4×4 vehicles have different requirements than those used in driveshafts since they are mounted directly at the – Driveshaft U-Joints. – U-Joint Models and Part Numbers.
What are the uses of universal joint?
1.0 GENERAL.