What is a no cam compound bow?
At first glance, a no-cam bow looks like it has a couple of round, idler wheels on it like vintage compound bows of yesteryear. The difference though, in layman’s terms, is that the camming move happens on the offset inner ring of the cam. “Today all the quality bows stay pretty tuned,” he said.
Are no cam bows good?
In summary, the NO CAM HTR is a fantastic bow for the bowhunter who wants smooth, consistent accuracy.
Do no cam bows have let off?
The NO CAM HTR weighs 4.3 pounds, has a 6 5/8-inch brace height and can accommodate draw lengths from 24-30 inches, in half-inch increments. It’s available in peak draw weights of 50, 60 or 70 pounds and has an adjustable system letoff of 65, 75 or 85 percent.
Are single cam bows better?
As a result, single cams are usually more accurate. The only exception would be binary dual cam bows which are generally the most accurate dual cam models, but they still aren’t more accurate than a single cam.
What year did the Mathews no Cam come out?
At the 2014 Mathews Retailer Show, Mathews introduced its newest compound bow, the NO CAM HTR.
Do all compound bows have cams?
There are four types of cam systems: single cam, hybrid cams, binary cams, and twin cams. Most starter compound bows come with a single cam system, and they’re the most popular on the market today. It consists of a round idler wheel on the top of the bow and an elliptical-shaped power-cam on the bottom.
Why do bows have cams?
On a bow, the inner cams act as a block and tackle that pull the limbs of the bow together as the cable is drawn. The pulleys create mechanical advantage, multiplying the force applied by the archer.
What year was Mathews no Cam made?
When was the Mathews no Cam bow made?
Invented in 1992, solocam technology put Mathews on the map by using one cam and one idler wheel. As a result, bows took a giant leap in both simplicity and smooth draw characteristics.
How fast is Mathews HTR no Cam?
330 fps
Mathews rates the NO CAM HTR (its 6… -inch brace height hunting bow) “up to 330 fps” IBO with the 65-percent module (as let-off percentage decreases, so does top-end speed).
What is a hybrid compound bow?
A hybrid bow looks like a compound bow, and when you shoot it, you shoot it the same way you would a compound bow. This is what we use a lot for training, because it has no limitations. Compound bow is also built basically the same way, with a riser section, and limbs on either end.
How do you change the draw length on a Mathews no Cam?
Simply remove the two allen screws that hold the module to the wheel and install your new module in it’s place. As noted earlier these modules can change both your draw length as well as your let-off, which will change your bow’s speed. The lower the let-off the faster the bow.
What is the difference between single and dual cam bows?
Dual cam bows have to have their cams perfectly timed so that they pull the limbs with equal force and release that force at the same time. Even a slight inconsistency can throw the arrow off course. As a result, single cams are usually more accurate.
How do you adjust the draw weight on a Mathews no cam?
Draw weight adjustments are made using either a 3/16” or 7/32” Allen Wrench. Turn the limb bolt clockwise to increase the draw weight and counter clockwise to decrease the weight. Both limb bolts must be adjusted equally, or the bow may become out of tune/synchronization. The limb bolt should be snug.
Do Mathews bows have adjustable draw length?
With the exception of the Mathews Mission series, Mathews bows are designed draw length specific, and do not provide for setting adjustment. While the Mission series draw length can be changed with a setscrew on the cams, you will need to replace the cams to change the draw length on other models of Mathews bows.
Can you adjust the draw length on a Mathews no cam?
What are the best brands of compound bow?
Hoyt Archery. Hoyt Archery is a well-known brand of American citizens as well as leading the whole archery world by providing featured prominently products in the market.
What is better a compound bow or a crossbow?
Crossbow Reliability Vs. Bow Reliability. In a survival-type situation, simplicity often means better reliability, and this applies when evaluating the crossbow against the bow as well. A compound bow is a complex machine and requires much maintenance and tuning, and it would be difficult to do running repairs in the field on a bow like this.
What are the components of a compound bow?
Parts of a Compound Bow. 1. Riser. The riser is the most rigid part of the bow. It is the middle part of the bow. Several other components such as limbs, arrow rest, and sight are mounted to the riser and it contains the grip. It provides stability for other components.
What are the different types of compound bows?
Single Cam Compound Bow. A single cam compound bow has one circular idler wheel at the top of the bow and an elliptical power cam on the bottom doing most