How much does it cost to have a well drilled in Georgia?
Most residential wells, including the well pump and equipment, cost between $6,000 and $12,000. Municipal, agricultural and industrial water systems can cost much more. Do I need a permit for my well? Residential well permitting is required by some counties in Georgia.
Can you drill your own well in Georgia?
Is It Legal To Drill Your Own Well In Georgia? (a) All persons except those employed by a primary home will be allowed to drill a well on their own property, whether it’s their primary home or personal property.
How deep is the average well in Georgia?
There are two main types of household wells in Georgia. “Bored” wells are dug with an auger and are typically 24 to 30 inches in diameter and 10 to 30 feet deep. “Drilled” wells are much smaller in diameter and considerably deeper – usually 100 to 400 feet deep.
How deep should a private well be?
between 100 to 800 feet
For drinking water wells it’s best to be at least 100 feet deep so that surface contaminants cannot enter the well. The average well depth for private homes is between 100 to 800 feet [2]. You may need a deeper or shallower well if your area has different geology than another region of the country.
How long does it take to drill 100 ft well?
How Long Does It Take To Drill A 100 Foot Water Well? The average time it takes to drill a water well on a given site is between three and four days depending on its condition, weather and depth.
Is well water in Georgia safe to drink?
20% of the wells tested were not safe and could be harmful. The University of Georgia’s Extension program states that of the 10.5 million Georgians, 1.7 million use a private well. That is a large portion of the Georgia population using water that could be harmful to their health.
Are there underground springs in Georgia?
Warm Springs, located on the lower slopes of Pine Mountain in Meriwether County, has long been known for its healing waters. Native Americans used to bring their wounded warriors to the springs, which have a year-round temperature of 88 degrees. A natural trap, about 2,800 feet underground, heats the water.
How deep is groundwater in Georgia?
Depths: 15 – 2,100 ft. Sustainable well yields: 1 – 50 gpm (up to 3,500 gpm). Levels affected by precipitation & local pumping. Most productive aquifers.
How close to a property line can you drill a well?
As a general guidance, personal drinking water wells should have a minimum horizontal distance of at least 10 feet and preferably 25 feet from such boundaries.
How much does it cost to drill a well in South Georgia?
Well Drilling Costs By State
| State | Average Cost Per Foot |
|---|---|
| District of Columbia | $31 – $69 |
| Florida | $26 – $58 |
| Georgia | $27 – $59 |
| Hawaii | $33 – $73 |
What is the best location for a well?
The best well site is in an elevated area which allows any surrounding surface water or rain to drain away from your well. This helps prevent contaminants from entering your well water. Also, stay away from steep slopes.
Are there fresh water springs in Georgia?
1. Radium Springs. Radium Springs, on the southern outskirts of Albany, has waters that are consistently 68 degrees, rushing from the earth at 70,000 gallons per minute. These waters, which contain traces of radium, are the largest natural springs in Georgia.
Where can I find a list of licensed water well drillers?
EPD also maintains listings of active licensed water well drillers and active certified pump installers. Link to GA Department of Public Health Contact Information (scroll to bottom of the Department of Public Health page for links to District or County contacts)
Why hire a licensed water well contractor?
By using a licensed water well contractor, you can ensure that they meet basic criteria listed below. In addition, prior to actual construction, the water well contractor must notify the county health department of the intent to drill a water well, providing such information as is required on forms prepared by the Water Well Council.
How do I get my well water tested?
This testing may be available through County Environmental Health Offices . In addition to bacterial testing, it is also recommended that a chemical screening (W33C analysis) of well water is done every 3 years. DPH recognizes the need to keep pace with emerging public health issues around the nation and throughout Georgia.
How do I protect my well water?
Protected the upper terminal of the well by a sanitary seal or cover to prevent entrance of pollutants to the well. It is recommended that a bacterial test (total coliform and fecal coliform) of well water is done annually. This testing may be available through County Environmental Health Offices .