How do I setup my adsl2+ modem router?

Posted on by Mary Andersen

How do I setup my adsl2+ modem router?

Connect the Modem-Router’s power cord into the back of the Modem-Router. Connect a telephone cable from the wall into the back of the Modem-Router. Find your new networking cable (it came in the box with your Modem-Router) and connect it to one of the LAN ports on the back of the Modem-Router.

How do I configure my ADSL router for cable broadband?

How to setup the ADSL Router in ethernet mode

  1. You will see this following page, please hit on Advanced Settings.
  2. Click Advanced Setup first, then click connection Mode, check Ethernet Mode and click Apply.
  3. In the following page, please choose default mode and click Apply/Save to save the setting.

How do I connect my ADSL modem to Ethernet?

Connect one end of the Ethernet cable to the ENET port on the rear of the ADSL modem. Connect the other end of the Ethernet cable to the Ethernet port on the NIC in your computer.

How do I use my ADSL2 modem as a Wi-Fi router?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How can I configure BSNL ADSL modem with WiFi router?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

Can I use BSNL modem as Wi-Fi router?

Connect the second modem/router to your PC/Laptop with a LAN cable and open the configuration page typing 192.168. 1.1 i.e modem IP. Type username and password as admin. That’s all you have to do.

How do I re configure my modem?

  1. Connect to your network wirelessly, or via ethernet.
  2. Find your router configuration page.
  3. Log in with the username and password.
  4. Find the Wireless Settings page.
  5. Set the new channel, usually with a dropdown menu.
  6. Your router will now reboot.

How do I set network configuration?

Manually set network settings

  1. Open the Activities overview and start typing Settings.
  2. Click on Settings.
  3. If you plug in to the network with a cable, click Network.
  4. Click the.
  5. Select the IPv4 or IPv6 tab and change the Method to Manual.
  6. Type in the IP Address and Gateway, as well as the appropriate Netmask.

How can I get BSNL high speed internet?

How to change BSNL APN settings to increase BSNL internet speed

  1. Open mobile Settings app.
  2. Click on ‘Network & Internet’ and find ‘Mobile network’ menu.
  3. Now go to ‘APN’ (Access Point Names) menu.
  4. Click on create new APN.
  5. Below is the BSNL network APN setting.

Does BSNL modem come with a manual?

For this setup, BSNL modem comes with a CD, which frankly speaking, is the worst manual I have ever seen. We have to wait for almost a week for the BSNL guys to come at our home and do the necessary configuration. So today we are going to share A-Z everything you need to know to properly configure your BSNL Modem and LAN without the BSNL guys .

How to set up BSNL ADSL2+ super speed land line broadband internet connection?

Enter the PPPoE username & password which every bsnl broadband users are given via phone and click on next to save the configuration and you are done setting up the bsnl ADSL2+ super speed land line broadband internet connection.

How to setup PPPoE on BSNL modem?

By default BSNL Modem comes with an active PPPoE setup which we need to delete. Just press the delete Tab after the configuration. Now we need to create a Bridge connection with proper settings to make a dial-up settings through LAN. It is very much simple… Just follow the steps… Click on the “ Add ” button on that page.

How to configure ADSL broadband?

To begin our ADSL broadband configuration process we have to click on the Start button and go the control panel. From there click on Network connections. Right Click on Local Area Connections and select Properties.