How do I connect my ELM327 Bluetooth to my PC?

How do I connect my ELM327 Bluetooth to my PC?

1. STEP 1: Plug Bluetooth into Car’s OBD Port. It looks like this…
2. STEP 2: Turn ON Car Ignition. This is one step before engine is powered.
3. STEP 3: Add and Pair ELM327 Bluetooth to Windows. Right click on Bluetooth icon in task manager > Add a Device.
4. STEP 4: Launch OBD Software and Connect to Vehicle. Launch OBD Software.

How install ELM327 on Windows?

Connect ELM327 cable to your laptop. Select “Let me pick from a list of device drivers on my computer”. UNcheck “Show compatible hardware”. Install. That’s it!

Can I use my computer as an obd2 Scanner?

OBDLink SX will quickly and accurately diagnose engine problems and provide real-time engine data. All you need is a 1996 or newer vehicle and a Windows tablet or laptop with a USB port, and you have a sophisticated, yet easy-to-use diagnostics system.

How do I use ELM327 interface?

The most common steps are:

1. Plug the ELM327 Bluetooth device into the OBD-II port.
2. Set the smartphone, tablet, or laptop to scan for available connections.
3. Select the ELM327 scan tool.
4. Input the pairing code.

What version is ELM327?

Released software versions for the ELM327 are 1.0, 1.0a, 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.4, 1.4b, 2.0, 2.1, 2.2 and 2.3 only. The actual functions of these copies are nonetheless limited to the functions of the original ELM327 v1. 0, with their inherent deficiencies.

Can I use my computer as an OBD2 scanner?

Can I use a laptop as a scan tool?

By installing diagnostic software, and purchasing an OBD-II interface, a laptop can become a powerful, portable scanner with a large high-resolution display screen. Technicians who already own a laptop can avoid some of the cost of a hand-held scanner or code reader by using it as a scan tool.

https://www.youtube.com/watch?v=up25m-JJRik

How do I connect my OBD scanner to my computer?

Pair OBDII diagnostic car scanner with Windows PC through…

1. Install the USB interface OBDII car scanner on your car.
2. Install ScanMaster-ELM software (ScanMaster-ELM V2.
3. Open Windows PC’s Bluetooth, then click “Add a Device” and search OBDII car scanner’s Bluetooth.

How do I set up ELM327?

1. Plug ELM327 WIFI Scanner into vehicle’s OBD2 port.
2. Turn ON ignition.
3. On your device — go to “Settings” > “Wi-Fi”.
4. Launch your OBD App.
5. Go to Apps Settings and configure it to look for WIFI.
6. OBD App should now successfully connect to your vehicle.

How do I use OBD Bluetooth scanner?

Here’s a simple step-by-step guide:

1. Step 1: Locate The Diagnostic Link Connector.
2. Step 2: Connect Your OBD2 Code Reader Or Scanner To The DLC.
3. Step 3: Enter The Information Requested On The Scanner Screen.
4. Step 4: Access The Scanner Menu For OBD Codes.
5. Step 5: Identify And Understand the OBD Codes.

What is the best obd2 software for laptop?

TOP PICK!

1. TOAD. Works on all makes and models. Free updates for life.
2. FORScan. Complete list of Ford codes. Run diagnostics and performance checks.
3. Palmer Performance PCMSCAN. Comfortable handheld design. Rugged rubber housing.
4. OBD Auto Doctor. Works on all computers or mobile devices.
5. Autoenginuity. Easy to use software.

How do I connect my Bluetooth in my car to my laptop?

On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.

Can I use my laptop as a OBD2 scanner?

How do I connect OBD2 to my PC?

Open Windows PC’s Bluetooth, then click “Add a Device” and search OBDII car scanner’s Bluetooth. 4. Double-click “OBDII” then “Select a pairing option” will pop up. Choose “Enter the device’s pairing code”.

What is ELM327 Bluetooth?

The ELM327 is a programmed microcontroller produced for translating the on-board diagnostics (OBD) interface found in most modern cars. The ELM327 command protocol is one of the most popular PC-to-OBD interface standards and is also implemented by other vendors.

How do I connect to Torque Pro ELM327?

How Instructions:

1. In Torque, go to “Settings”. Updating these 2 settings:
2. Tap “Connection” and choose either “Bluetooth” or “WIFI”, as seen below…
3. Tap “Device” and choose name of connected ELM327 Bluetooth/WIFI signal.
4. Now force close Torque via “Task Manager” on your Android device.
5. That’s it.

How do I connect my car to Bluetooth with ELM327?

Download and Print the Windows Bluetooth ELM327 Setup Instruction Manual Start your vehicle or at minimum have the ignition switch on. Connect the ELM327 interface to the OBD-II adapter in your vehicle. The OBDII plug is normally located under the steering column or dash board, about 3 feet away from the driver.

What is the ELM327 Bluetooth scanner?

“ You Deserve To Safely Diagnose Your Vehicle Faults and Perform Advanced Diagnostics With This ‘Automotive-Approved’ ELM327 Bluetooth Scanner ( That’ll Capture More Information Then Competitor OBD2 Bluetooth Scan Tools) – Using any OBD2 Software or Android App You Already Own! ” (Works on any version of Windows, MacOS — and any OBD app on Android.

How do I install the drivers for the ELM327?

In most instances when connecting the ELM327 to your computer (via USB, Bluetooth or WiFi) the drivers should automatically install. If this is not the case or the drivers are corrupt you will need to either re-install the drivers or try to install them manually using the software made available here.

Why is my ELM327 device not connecting to my computer?

ELM327 Drivers need to be properly installed in order for your device to work with your computer. If the drivers are not installed properly you will have trouble communication with your device. In most instances when connecting the ELM327 to your computer (via USB, Bluetooth or WiFi) the drivers should automatically install.