Can you use radial tires on a trailer?
Yes, you can use radial tires on a trailer as long as they are trailer tires. Trailer tires will have ST in front of the size. Radial indicates which way the belts run in the tire.
What is the difference between bias ply and radial trailer tires?
A radial trailer tire is constructed with steel belts of the tire running at a 90 degree angle of the tread center line. A bias ply trailer tire is constructed with nylon belts of the tire running at a 30-45 degree angle of the tread center line.
Why radial tires are better?
“Radials offer lower fuel consumption, better traction and flotation and improved cut resistance in the tread area, and run much cooler than bias.” “Radial advantages are pretty much across the board,” agrees Wright. Typically they offer longer tread wear and a smoother ride.
Is radial or bias better for trailer?
Radial tires, however, do perform better than bias tires, and that performance is quickly noticeable. The ride is smoother, the trailer does not bounce and sway as much, and radial tires have a longer life. The most important characteristic of any trailer tire is its ability to carry a heavy load.
What does the D stand for on trailer tires?
The D is the designation for the internal construction of the tire. The D stands for diagonal or bias ply construction. That means the tire body plies inside the tire will crisscross. The 15 is the wheel diameter in inches and the C after the tire size will designate the load range.
Why Radial tires are better?
Can you mix radial and bias ply tires on a trailer?
Bias-ply trailer tires No matter which type of trailer tire you choose – radial or bias-ply – make sure you don’t mix them on your trailer. Since their internal construction is so different, each type performs differently, and combining them can negatively affect your trailer’s ride quality and the tires’ life.
What is a major disadvantage of a bias ply tire?
A bias tyre consists of multiple rubber plies that over lap each other. The center-tread area of the tyre and the sidewalls are interdependent and the plies that are overlapped form a layer that is thicker and not so much flexible resulting in the tyres being more sensitive to overheating.
How do you know if its radial or bias?
Bias tires are made by crisscrossing cords of polyester and nylon belts at a 30 to 45-degree angle to the tread’s centerline. Whereas Radials are constructed with crisscrossing steel belts underneath the tread and increase structural integrity.
Do you need to rotate trailer tires?
Trailers, just like vehicles, need their tires rotated too. To avoid mechanical problems both minor and major, it is recommended that you rotate your trailer tires.