How wide a board can a 10 inch sliding miter saw cut?
Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).
How thick of wood can a 10 miter saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
Can I use a smaller blade on my 12 miter saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
Can you use different size blades on miter saw?
A 12-inch miter saw works best for cutting 4×4 at 90-degree in a single pass. However you can also use a 10-inch miter saw to cut 4×4 if you adjust the blade guard.
What is a 10-inch miter saw good for?
Whether cutting trim boards, picture frames, crown molding, or just wide hardwood boards, a 10″ sliding compound mitersaw can do it all. With crosscut capacities nearing 13″, these saws have made radial-arm saws all but obsolete.
Can you use a smaller blade on a 10-inch miter saw?
Yes you can. Smaller blades can run faster since their mass is closer to the axis of rotation (I think), so they can be made thinner. But, the RPM of a smaller blade will be the same as that of a larger blade, and in fact the cutting edge will be moving slower.
Can I use a 7 blade on 12 miter saw?
Can I cut a 4×4 in a 10 sliding miter saw?
If you really want to cut 4x4s reliably, and if you foresee many future projects involving 4x4s, then you’re asking the wrong question. It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
Will a 12in miter saw cut a 4×4?
The size of the 12” miter saw blade is such that it can easily cut through a 4×4. So, if you want to avoid the extra work, then a 12” saw is recommended.
Can you use a smaller blade on a 10 inch miter saw?
What is the difference between a Bosch cm10gd and gcm12sd miter saw?
While they do have their similarities, these two miters saws also have unique differences that make them stand out from each other, such as the following: As their model numbers imply, the Bosch CM10GD uses a 10-inch blade while the Bosch GCM12SD uses a 12-inch blade.
What kind of miter saw does Bosch make?
(1) GCM12SD 12 In. Dual-Bevel Glide Miter Saw The Bosch GCM12SD is a 12 In. Dual-Bevel Glide miter saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide system
What is a dual-bevel glide miter saw?
Dual-Bevel Glide miter saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide system Pre-aligned SquareLockfences help the saw maintain precision throughout its life
What does a 10 inch miter saw look like?
This 10-inch miter saw ( read my full review) has a 15-amp motor that delivers 4,800 rotations per minute. It can cut up to 12 inches horizontally, 5-1/2 inches vertically, and has a 6-inch crown capacity at a 45-degree spring. It has a miter angle of 52 degrees (left) and 60 degrees (right).