What is Hyload DPC?
IKO Hyload Original High Performance DPC system is a flexible polymeric sheet material, used within masonry walls to prevent the passage of moisture from the ground, and at all levels as a cavity tray to prevent the downward movement of water.
What is Hyload?
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.
Is DPC UV resistant?
Its anti-ageing and dimensional stability properties, as well as its resistance to rot, damage from damp conditions, mildew and UV light are such that Specifiers and Builders can rest assured that Visqueen Zedex CPT High Performance DPC will continue to perform at a high level for the lifetime of the building.
What is DPC plastic?
A damp-proof course or DPC is a horizontal barrier in a wall designed to resist moisture rising through the structure by capillary action – a phenomenon known as rising damp.
What is DMP plastic?
Damp proof membranes are made from high quality recycled plastic. Intended for use under the solid concrete floors to prevent the rise of moisture or damp through structure flooring. They are used on walls to isolate the wall from the exterior and interior contaminations.
How does water get into cavity walls?
Today’s modern cavity walls are just as susceptible. Until the 20th century, solid brick walls were normal. But the trouble with them is moisture penetration. Water is absorbed by bricks and mortar, and it travels between them by capillary action or wind pressure.
When should you install a cavity tray?
When a lintel runs continuously across narrow piers 600mm or less, it is recommended that a single cavity tray is installed across the pier. It is important to remember that any laps must be well sealed and the cavity above the tray kept clean of any debris or mortar dropping to ensure adequate functioning.
What is Micron DPC?
Damp proof course is best utilized in preventing rising damp in walls. It prevents efflorescence and flaking of the wall covering. It will not absorb water and is chemically inert. Dimension – 0.6m x 40m.
What materials are commonly used for a damp proof course?
Materials widely used for damp proofing include:
- Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead, copper, etc.
- Semi-rigid materials like mastic asphalt.
How do you stop water coming through walls?
The solution: While you can’t stop it from raining, you can take measures to protect your brick walls from rain. Always use a breathable sealant to treat brick surfaces. Painting on bricks or using a non-breathable sealant can trap water under the surface and lead to more damage.
How do you damp proof a cavity wall?
Remedy- you may have Rising Dampness, or your damp proof course may be ‘bridged’ by high outside ground, plaster on the inside or debris in the cavity (cavity walls only). Rectify any defects and if necessary inject Quick Cream at the correct level to form a new Damp Proof Course.
What is DPC plastic used for?
A damp-proof course or DPC is a horizontal barrier in a wall designed to resist moisture rising through the structure by capillary action – a phenomenon known as rising damp. DPC is used to stop dampness in buildings.
What are the 3 types of DPC?
Types of Damp Proofing Course
- Hot Bitumen. The hot bitumen type of damp proofing course is a flexible material that is placed on the mortar or the concrete bed.
- Bituminous Felts. The bituminous felt also flexible material.
- Metal Sheets.
- Mastic Asphalt.
- Stone.
- Mortar.
- Cement Concrete.
What is the thickness of damp proof course?
The DPC should be of 40mm thickness and should be of uniform thickness. It should not be provided at the locations of the door openings. The top level of DPC should match with the planned finished floor level.
Can you walk on liquid DPM?
Would not recommend for walking directly over this without a epoxy resin sealer due to this never really goes off. Ie it will always be tacky/sticky once dry. Have used it on cellar walls were no other product would stick to it because it was so wet.
What is a hyload roofing system?
Total Overhead Protection. Hyload Roofing Systems combine DuPont™ Elvaloy® KEE roofing resins with coal tar pitch and polyester fibers. This formula creates a high-performance membrane by linking advancements in roofing technologies with durable components.
What is Iko hyload?
(4) IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.
What is hyload flashing system?
The Ultimate Flashing System. Backed by over four decades of proven performance, Hyload’s Through-Wall Masonry Flashing Systems are user-friendly, quality-assured and time-tested. These high-performance systems offer three-dimensional preformed shapes (Cloaks).