What is a standard flue size?
Flue tile should be at least 5/8-inch thick. It is available in several sizes. The most commonly used sizes in residential construction are 8 by 8 inches, 8 by 13, and 13 by 13 (outside dimensions). Flue tiles are connected together with cement mortar joints, struck smooth on the inside.
Where can I buy fireplace flue?
The flue is essentially a channel inside the chimney the smoke is funneled through, and it’s controlled by the damper — a pair of small steel doors. These doors, located at the throat of the flue before it exits the chimney, need to be opened prior to igniting a fire.
What size do chimney flues come in?
Superior Clay manufactures a complete line of vitrified clay flue liners from 3″ to 36″ diameters in round flue liners and from 4″x8″ to 24″x24″ in square and rectangular flue liners.
Is a damper and flue the same thing?
A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.
Do all fireplaces need a flue?
The simple answer is yes, and that’s for safety reasons. A flue is necessary to effectively and safely remove harmful gases – such as carbon monoxide – which are created when the gas fuel is burnt. They are safely transported into the air outside the home.
Can a cracked chimney flue be repaired?
If your flue liner is cracked, this is the solution: a stainless steel insert. It’s placed down the entire length of the flue, sealing the old liner. It’s a job that can be done by a professional in just a few hours.
Can a chimney flue be repaired?
Two methods are used to repair the interior of a chimney flue liner: The Joint Repair System is useful when repair is only for defective mortar joints; and. The Resurfacing System, which repairs mortar joints as well as minor defects in clay flue liners or tiles.
How do I know what kind of flue I have?
The best clue to knowing what type of flue you have is by simply looking at your roof and seeing what kind of outlet it has. Most of our gas fires are class 1, class 2 and precast suitable, however in the case of our wall mounted fires the requirements vary.
What does a pre cast flue look like?
Prefabricated Flues (Class 2) You can easily identify a prefabricated flue by the metal cowl on the roof, which looks like a thin metal chimney. What fires can you have with a prefabricated flue? You can have electric, gas and gel fires with a prefabricated flue. They’re not equipped to deal with solid fuel fires.
How do you measure flue size?
Step 1: Find the cross-sectional area of the fireplace opening. Multiply the W=36″ X H=30″ and that equals 1080 square inches of fireplace opening. Step 2: If you are using a round liner and the chimney height is more than 8′ above the fireplace opening you can divide the 1080 by 12. This amount equals 90″.