How do I bypass the toner light on a Brother printer?

How do I bypass the toner light on a Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

How do you bypass a Brother printer without toner?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit.

How do I reset my toner HL-2270DW?

Brother HL-2270DW – Reset Toner Cartridge

1. Ensure the printer is turned off.
2. Open the printer front cover.
3. Hold the Go button while turning the printer on.
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
5. Press the Go button two (2) times.

How do I get rid of replace toner message?

Open the front cover. Take the toner & drum unit out of the machine….

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do I reset my brother toner counter?

Open the front cover of the printer and press the CLEAR / BACK button. Press the following buttons on the keypad in this sequence, *, 0 and finally 0. Close the front cover. The warning message should now be clear.

How can I extend my Brother toner life?

To enable or disable Continue Mode, follow the steps below:

1. Press the Up or Down arrow key to choose General Setup, and then press OK.
2. Press the Up or Down arrow key to choose Replace Toner, and then press OK.
3. Press the Up or Down arrow key to choose Continue or Stop. Press Go.

How to reset the toner on hl-2270dw?

HL-2270dw toner reset may also sometimes require you to reset the toner sensor. This is a method similar to the first method. To reset the toner sensor, follow the steps mentioned below: Open the front cover. Press and hold the “go” button. Release it when all LEDs are open Now press the start button two times. All LEDs should be on again

What kind of printer is the Brother HL 2270dw?

Compact, Monochrome Laser Printer for Small Offices or Home OfficesThe Brother™ HL-2270DW is a monochrome laser printer that offers an automatic duplex capability for printing two-sided documents with ease, fast printing at up to 27 pages per minute, and built-in wired and wireless networking for sharing with others.

What can I print on the hl-2270dw?

The HL-2270DW can meet all of your printing needs via an adjustable, 250-sheet capacity paper tray‡ that handles letter or legal size paper and a manual feed slot for printing envelopes and letterhead. Easily print two-sided documents. Produce professional two-sided documents, brochures and booklets using the automatic duplex printing feature.

What happens if I use third party toner in my Brother machine?

Use or attempted use of potentially incompatible toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third party toner and/or cartridges.