Do they make an 11/16 drill bit?

11/16-in Twist Drill Bits at Lowes.com.

Table of Contents

What drill bit is near 11 16?

For shank bits, you’ll work with these sizes: 1/2; 33/64; 17/32; 35/64; 9/16; 37/64; 19/32; 39/64; 5/8; 41/64; 21/32; 43/64; 11/16; 45/64; 23/32; 47/64; 3/4; 49/64; 25/32; 51/64; 13/16; 53/64; 27/32; 55/64; 7/8; 57/64; 29/32; 59/64; 15/16; 61/64; 31/32; 63/64; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2.

Is cobalt the strongest drill bit?

Cobalt Drill Bits – Not a Coating These are the best drill bits for metal due to their high resistance to the massive heat generated when drilling through highly abrasive and/or hard materials such as treated stainless steel, titanium, and cast iron.

What size drill bit is 11 32?

Drill Bit Hole Diameters
Metric Size	Fractional Size
11 mm	.4331	5/16
12 mm	.4724	21/64
13 mm	.5118	11/32

What drill bit is closest to 9 16?

Below is a chart providing the decimal-fraction equivalents that are most relevant to fractional-inch drill bit sizes (that is, 0 to 1 by 64ths)….Decimal-fraction equivalents.

fraction	in	mm
33⁄64	0.515625	13.096875
17⁄32	0.53125	13.49375
35⁄64	0.546875	13.890625
9⁄16	0.5625	14.2875

What size is #16 drill bit?

Drill Bit Size Chart

Size	Decimal Equivalent	Size
69	0.0292	11/64″
.75 mm	0.0295	17
68	0.031	4.40 mm
1/32″	0.0312	16

What size is close to 11 32 drill bit?

Drill Bit Hole Diameters
Metric Size	Fractional Size
12 mm	.4724	21/64
13 mm	.5118	11/32
14 mm	.5512	23/64

What’s better cobalt or titanium?

Cobalt drill bits are more expensive, but offer longer life, and are more resistant to heat than titanium drill bits. Cobalt drill bits are also tougher and can drill holes in the hardest metals.

How are drill bits sized?

Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.

What is a 9/16 drill bit equivalent to?

Jobber Length Drill Bit Chart

Fractional Sizes	Decimal Equivalent (Inches)	Flute Length (Inches)
33/64”	0.5156	4-13/16”
17/32”	0.5312	4-13/16”
35/64”	0.5469	4-13/16”
9/16”	0.5625	4-13/16”

What drill bit is better than cobalt?

Cobalt bits have a hardness of approximately 65HRC whereas tungsten carbide has a hardness of up to 75HRC on Rockwell scale. This is the main reason that carbide drill bits tend to outperform their cobalt counterparts.