How do I use Airtite coin holders?
To use, simply place a coin in the base and snap the cover on. Direct fit holders require a snug fit between the coin and the holder to keep the coin in place. Air-Tites exacting manufacturing process ensures that an Air-Tite will always fit the coin it was intended to hold.
Are coin tubes air tight?
Each tube is designed to hold 20 Air-Tites and is crystal clear. They also feature an air tight cap and a welded bottom that accommodate both ring type and direct fit holders.
What is a size a Airtite?
< Air-Tite Ring Type coin holders are available in six sizes. The (A) size holder fits 10mm ~ 19mm rings. The (T) size holder fits 20mm ~ 25mm rings. The (H) size holder fits 26mm ~ 32mm rings.
How do you open an airtight coin case?
How to Open a Coin Capsule
- Air-Tite Brand holders are some of the best coin capsules on the market.
- Here at OnFireGuy, we recommend using a utility knife to carefully pry around the edge of the capsule.
- After the top is removed, place the bottom half with the coin between your middle finger and thumb.
How do you store expensive coins?
“A rare coin, or any coin really, is best stored in a velvet or flocked tray, within a coin cabinet. Try avoiding storing your coins in plastic pockets or paper envelopes that are not acid-free.” “The best way to store rare coins long term would be in paper envelopes.
How do you secure coins in holders?
Staple at the bottom of the holder. Use stapling in addition to the adhesive, or consider not using the adhesive at all if you’re concerned about its potential damage to the coin. Use a pair of pliers to gently squeeze and flatten the two prongs of the staple that get folded at the back of the coin holder.
What coin is 22mm?
Philharmonic Gold
Coin Sizes – millimeters
Coin Diameter ( US Coin Sizes) | Coin Type |
---|---|
22mm | 1/4 oz. Philharmonic Gold |
28mm | 1/2 oz. Philharmonic Gold |
37.1mm | 100 Corona Gold |
37mm | 1 oz. Philharmonic Gold, 1 oz. Philharmonic Silver |
How do you open an Air-Tite capsule?
Simply use a sharp kitchen knife and carefully insert the edge into the seam that separates the two halves and gently pry apart. Air-Tites can be re-opened numerous time, but keep in mind that after a few openings the seal will not be as tight when reclosed and the capsule may show some damage.
What is the best container to store coins?
Groups of Coins, or Collections are best stored in plastic coin boxes, such as sold by PCGS, NGC and Whitman, and which will hold 20, separated, “slabbed” coins, of any size. Another alternative is a cardboard coin storage box (single and double; red, blue or black), which stack easily on each other.
Is it OK to store old coins in plastic bags?
For expensive coins that can be tarnished, collectors should avoid using cardboard folders, paper or plastic bags, certain plastic tubes, and any other storage container that isn’t chemically inert.
How do you use a direct fit coin holder?
Direct fit holders come in two pieces, the base and the cover. To use, simply place a coin in the base and snap the cover on. Direct fit holders require a snug fit between the coin and the holder to keep the coin in place.
What is an Air-Tite coin holder?
Direct fit holders require a snug fit between the coin and the holder to keep the coin in place. Air-Tites exacting manufacturing process ensures that an Air-Tite will always fit the coin it was intended to hold. These holders have been designed to hold almost every type of US coin, medallion and bullion.
What are the different sizes of Airtite Coin capsules?
Air-Tite Model “I” Coin Capsules from $0.85 Direct Fit Air-Tite X1.75 – Challenge Coin/Token from $1.00 Direct Fit Air-Tite X6 – 2 oz. Silver Round from $1.00 Direct Fit Air-Tite Z10 – 10. oz. Silver Round from $1.90 CoinSafe Direct Fit 43mm Coin Capsules from $1.10
Will my Coin rattle in the holder?
These direct fit holders have been designed for a coin or medallion in mint condition. You may find that a coin having some wear on the rims may rattle in these holders. If that is the case we recommend you purchase our holder with rings to prevent movement within the holder.