Can you have 2 dimmers on the same circuit?
You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
How do you wire a dimmer circuit?
Connect the New Dimmer Switch Connect the ground wire from your dimmer to a green or bare copper wire in the wall box. Twist the ends together clockwise and cap them using a wire connector nut. Connect each dimmer wire to a house wire by gripping the wire ends with a pair of pliers and twisting them together.
Can you put 2 dimmers on a 3-way switch?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only.
Can neutral and ground be tied together?
No, the neutral and ground should never be wired together. This is wrong, and potentially dangerous. When you plug in something in the outlet, the neutral will be live, as it closes the circuit. If the ground is wired to the neutral, the ground of the applicance will also be live.
What does L1 and L2 mean on a dimmer switch?
The other terminal is marked as L1 and is the output to the light fixture. When you’re wiring decorative light switches such as chrome or stainless steel etc, you’ll find that the switch will also have an L2 terminal which means it’s a two way switch.
How do you wire two dimmer switches in the same box?
Enjoy the convenience of operating two dimmers from the same box.
- Choose a dual dimmer control style.
- Cut off the power supply running through the circuit that feeds the box.
- Remove the existing switch.
- Identify and mark the hot wire.
- Install the wires on the dual switch.
- Turn the power back on at the breaker box.
How to install a dimmer circuit in a lamp?
The dimmer circuit is wired in series with the lamp, you can say the dimmer circuits is installed in series with the lamp. Be careful that the circuit is not isolated from high voltage, so the potentiometer should be installed with plastic knob. Don’t touch the circuit or you’ll be shocked by the electricity.
What is the Q1 circuit for AC light dimmer?
The Q1 is UJT. For instance 2N4891 or others. I hope this circuit will be ideas for friends. Next, this is a very simplest AC light dimmer circuit, easy and inexpensive. In the below circuit, we use the dimmer circuit with the AC power line.
What is an automatic light dimmer circuit?
This is an automatic light dimmer circuit. You do not need to dim the lights by yourself. It is so very convenient because we use the LDR to detect external light. To control the Triac and the brightness of the lamp next. Suppose that, Low light so there is the voltage across the LDR a lot.
How much current does it take to turn on a dimmer?
You need to use 6.5A current. Otherwise, I am sure something will blow (the fuse). Way to modify an AC dimmer into a light switch circuit, to turn ON-OFF and automatic light dimmer or two in one form. Since the general dimmer uses TRIAC to control a load like a relay contact.