Can you install rear shocks upside down?
Registered. Reno is correct. Unless the shock is made to be body up, you should not mount it that way.
Does it matter which way rear shocks go?
The correct way to mount it is as shown with the boot down and the label facing so it is not upside down. So, If you are not sure which way is up on your shocks or wonder if you can mount them either way, always look at the Bilstein logo. If it is upside down, so are your shocks!
Can you compress a shock by hand?
You cannot judge the strength or condition of a shock/strut by hand movement alone. The force and speed generated by a vehicle in operation exceeds what you can accomplish by hand. The fluid valves are calibrated to operate differently depending on the degree of movement inertia which cannot be duplicated by hand.
Do I need to jack up my truck to change rear shocks?
To replace rear shocks you do not need to jack up the car.
Can you flip shocks upside down?
If at the top, the pressure is placed on the shocks differently. This way, they wont leak….as BAD. If the shocks are upside down, the will leak FAST and directly onto the path of your wheels.
How are shocks supposed to be mounted?
Ultimately: don’t mount shocks upside down just because it looks cool. Sometimes a shock must be mounted upside down due to space limitations, or to protect the shock body, if this is the case, make sure you use a shock designed to be mounted upside down.
How tight should a shock absorber be?
The fasteners should be tightened until the bushing expands (bulges) to the same outside diameter of the metal washer. (see below) This allows for the proper amount of bushing squeeze so that the shock absorber can move properly in any direction.
Should you compress rear shock by hand?
Can you fit shock absorbers yourself?
Can I fit new shock absorbers myself? If you’re considering fitting new shock absorbers yourself, then you need to be an experienced and competent home mechanic. Park your car on a flat or level area—place chocks or wedges under the wheels that are going to stay on the ground.
Which way up do shock absorbers go?
The difference is that a mono-tube shock absorber can be mounted upside down or right side up and it will work either way. *NOTE A conventional two-tube shock absorber must be mounted somewhat vertically.
Why do people install shocks upside down?
Sometimes a shock must be mounted upside down due to space limitations, or to protect the shock body, if this is the case, make sure you use a shock designed to be mounted upside down.
What kind of shock can be mounted upside down?
The working piston and rod are very similar to the double tube shock design. The difference is that a mono-tube shock absorber can be mounted upside down or right side up and it will work either way. *NOTE A conventional two-tube shock absorber must be mounted somewhat vertically.
What angle do you mount shocks?
If you have a leaf spring, solid front axle with the shackles mounted in the rear, your shock absorbers should be mounted as far outboard as possible, but with a slight lean to the rear (About 1 to 2 degrees of rearward rake for every 2 inches of lift above stock, compounded geometrically).
How to install rear shocks?
Rear shocks are often much easier to replace than front shocks. This is often because front shocks have the springs integrated with the shock—a complete strut, in other words. The replacement cost depends heavily on if you want to replace the coil springs and top mount bearings at the same time or not.
How can I replace my rear shocks?
Replace your shocks and struts if: You notice poor steering response. Steering performance is stiff. Your car sways or leans when turning and changing lanes. Your vehicle bounces excessively when driving. Braking performance is unstable. These are all warning signs that your shocks and struts need to be replaced. They can occur at any time, so
How to replace rear shock mounts?
The first step is to turn the side mounts and raise the compartment floor to its top position.
How to install rear Motorcycle shocks?
Get the motorcycle elevated. Changing the dual rear shocks on your motorcycle is not a hard task.