What can the cbx40uhv be integrated with?
The CBX40UHV is at its innovative best when it’s integrated with the following: Harmony III™Zoning System – Divides your home into up to four separate, customizable comfort zones. Home Generator – Offers dependable protection during unexpected power outages.
What are the dimensions of the cbx40uhv-024?
CBX40UHV-024, -030 and -036 20 x 20 x 1 (508 x 508 x 25) X1963 -CBX40UHV-048, -042, and -060 20 x 25 x 1 (508 x 635 x 25) X1970 NOTE — To use one inch filter bend tabs up as illustrated in figure 32. BEND ALL THREE TABS FILTER COMPARTMENT Figure 32. Tabs Supply Air Blower 1. Check and clean blower wheel. 2.
How do you disassemble a cbx40uhv unit?
CBX40UHV units are factory-configured for installation in upflow or horizontal applications with right-hand air discharge. For downflow or horizontal left-hand air discharge, certain field modifications are required. CBX40UHV Cabinet To disassemble: 1. Remove access panels. 2. Remove both blower and coil assemblies.
How does a cbx40uhv blower motor work?
By sensing the position of the rotor and then switching the motor windings on and off in sequence, the rotor shaft turns the blower. All CBX40UHV blower motors use single phase power.
Can a cbx40uhv air handler be used with a hfc-410a?
CBX40UHV Control Box APPLICATION CBX40UHV air handlers are designed for HFC-410A applications only. All major air handler components must be matched according to Lennox recommendations for the unit to be covered under warranty. Refer to the Engineering Handbook for approved system matchups.
How long does a cbx40uhvpage 21 DC filter capacitor take to discharge?
CBX40UHVPage 21 The DC filter capacitors inside the controller are connected electrically to the motor supply wires. The capacitors take approximately 5 minutes to discharge when the disconnect is opened. For this reason it is necessary to wait at least 5 minutes after turning off power to the unit before attempting to service motor.