What is a detent plate on a miter saw?
The detent plate is a scale that indicates the tables miter angle, and the plate has stops along the scale at common angles. The detent plate is available as an individual replacement part.
What is the difference between a Mitre saw and compound Mitre saw?
Compound cuts include both a bevel and miter. A compound miter saw adds the ability to make bevel cuts in addition to its mitering ability. You’ll want to make sure you have this feature anytime you work with crown molding or other trim that gets installed on a wall.
Are miter saw blades reverse threaded?
Yes, it’s a reverse thread (I spoke with a few tool repair shops).
What is a miter detent override?
Miter Detent Override – Allows detent action to be locked out, allowing for micro-adjustments to any miter angle. 12. Miter lock Knob – The miter lock knob locks the miter saw table at any desired miter angle.
What cut should you never do on a miter saw?
What should you avoid when using a mitre saw?
- Do not operate the saw when placed on the ground.
- Do not cut pieces smaller than 20 cm (8 in.)
- Do not cut stock that has loose knots, splits, defects or foreign objects (e.g., metal stone) in it.
Can I use a 10 inch blade in a 12 inch miter saw?
Can I Put a 10 Inch Saw Blade on a 12 Inch Miter Saw? Many of us in the world of woodworking are familiar with a misconception, “we can’t replace the blade of the 12-inch miter saw with a 10 inch saw blade!” But the truth is that it’s 100% possible if you want to go for a better replacement.
How much does it cost to sharpen a miter saw blade?
Although the cost will vary depending on the quality, size, and material of the blade, you can expect to pay from 25 to 50 cents for every tooth of the blade that is sharpened.
Can you sharpen a Mitre saw blade?
Thankfully, sharpening a miter saw blade is not a tedious or time consuming process. In fact, it only takes about 15 minutes, after which you can return to your work and get the job done.