What is classic princess line?
“Princess line” or “princess dress” describes a woman’s fitted dress or other garment cut in long panels without a horizontal join or separation at the waist.
How are princess lines measured?
Draw a straight guide line from the mid-armhole* (point A) to the Bust Point. At the mid-point of the line just drawn (marked point B), at right angles to it, measure up for 3/6-inch (1cm) and mark a point (C).
What is the difference between princess line and Style Line?
Differentiate between princess line and style line….1 Answer.
S.No. | Princess line | Style line |
---|---|---|
1. | It is a seam in a garment that passes though the apex. | This seam does not pass through the apex. |
How are Princess seams measured?
Step 1 To find the width of your center front block, measure the widest part of the cross chest, from princess line to centerfront and add 4”. Record that measurement. Step 2 For your side front block, measure the widest part from apex to side seam and add 4”.
How Princess seams should fit?
Check if the princess seam curve’s apex is in line with the body’s actual breast apex. If apexes don’t line up, the fit is off and the garment as-is won’t look good on the body. If they don’t line up horizontally, the pattern curve will need to be raised or lowered.
Why is princess line called princess line?
He named it after the elegant Princess Alexandra of Denmark. A princess line is cut in long panels, without a horizontal joining seam or any separation at the waist. Instead, it uses darts and long seams to shape the body.
What is the amount of seam allowance required for princess line?
With a 12mm (1/2in) seam allowance, stitch down from the neckline to the drill hole (the point marked at the bottom of the seam). This little opening at the bottom of the seam will help you get a really nice point, when you join the bodice to the skirt.
What is a princess line?
Princess line is the name commonly given to panel lines that go through bust point, absorbing the dart value into the panel line. The panel line commonly curves from the armhole, down to the waistline through bust point, or from the center of the shoulder down through bust point to the waistline.
How should the Princess line panel be sewn up?
Note that the Princess line panel may require more shaping in the waist section, from the waist hem line up to the first notch. It is always recommended that a toile version of a new pattern be sewn up to test the pattern and the fit.
How do you make a princess pattern with cardboard?
Trace the outlines of the patterns onto the cardboard underneath, and smooth the curve of the panel lines by hand, by using a french curve ruler, or by using a similar pattern making guide. Make sure that the seam lines of the princess panel lines are equal to each other in length.
How do I use the princess seam?
The princess seam can be used for tops and dresses – just combine the bodice and skirt patterns into a dress before drawing the princess line. And remember: YOUR BLOCK DOES NOT HAVE SEAM OR HEM ALLOWANCES.