What is the master code for Weiser lock?
The lock is programmed with the default mastercode 0-0-0-0. Replace this with a code of your own. The mastercode must be 4-10 digits.
How do I reset my Weiser Smartcode 10 code?
Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.
How do I change my Weiser master code?
Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.
What type of key does Weiser use?
Use the “everday” keys to quickly rekey your SmarKey locks to a new key….820062-001 Re-Key Kit Other Locks & Accessories.
|Product Family||Weiser Re-Key Kit|
How do you use a Weiser keypad?
keyless entry- lock or unlock at the touch of a button.
- The door is now locked. To unlock the door, touch the.
- SecureScreen™ Touch the numbers in any order. to display the full touchscreen.
- Enter your code. Enter the access code.
- Wrong code. Enter the access code.
- The door is now unlocked. Tap the lock button to start over.
Can you duplicate a Weiser smart key?
A: SmartKey locks can only be re-keyed if you have the current functioning key and the SmartKey Learn Tool. If someone does not have the current functioning key, then that person will not be able to re-key your locks.
How do I contact Weiser Lock for assistance or warranty information?
For assistance or warranty information: call 1-800-677-5625 USA, 1-800-501-9471 CANADA or visit, www.weiserlock.com 9 Q: I just completed the installation of a Smart Code unit on my door; I am unable to operate it manually, although I checked for smooth bolt operation during installation.
How do I change the battery of my Philips keypad?
Press and hold the “LOCK” button on the exterior keypad, while fully inserting the battery pack into the interior assembly (the tab on the pack must face out – see illustration). Hold down lock button until you hear 2 beeps (about 20 seconds). It is very important that this process is allowed to finish properly.
How do I know if my keypad is low battery?
When the door is in the locked position, press the lock button to light up the keypad. In a “very low battery” condition the keypad will not light up. b. Keypad light signals Incorrect Codes Entered – when three incorrect codes are entered into the SmartCode the keypad will flash red and the beeper will sound for 15 seconds.
Where can I find the programming instructions for the lock?
Note: Programming instructions can also be found on interior of lock. Programming the 2nd user code. Extend the bolt by pressing the “LOCK” button and re-enter the code to test. The bolt should retract to the unlocked position.