Can you use 45 degree flare for an fitting?

Can you use 45 degree flare for an fitting?

The tool used to flare tubing consists of a die that grips the tube and a mandrel that is forced into the end of the tube to form the flare by cold working. The most common flare fitting standards in use today are the 45-degree SAE style, and the 37-degree AN style, also used with the JIC system.

Are flare and JIC fittings the same?

AN and JIC Fittings Interchangeability AN 37° flare and industrial 37° flare fittings function identically. In many cases, they appear to be functionally interchangeable, but they are not.

Is JIC the same as flare fittings?

JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. SAE 45-degree flare fittings are similar in appearance, but are not interchangeable, though dash sizes 2, 3, 4, 5, 8, 10, 14, and 16 share the same thread size.

Is JIC better than NPT?

However, their flare angle differs. JIC fittings come with a 37O flare angle, while the NPT fittings rely on just their tapered threads for sealing. As a result, JIC fittings offer better sealing capabilities and can withstand higher working pressures.

What is a 45 degree flare fitting?

SAE 45° Flare Fittings | Parker Parker 45° Flare Fittings are a highly dependable, economical choice of fitting for refrigeration, heating and air, and other industrial markets. These all-brass fittings feature a vibration resistant construction that is UL listed and meets SAE J512 and SAE J513 requirements.

Are flare fittings easy to disassemble and replace?

Flare fittings are easy to disassemble and can be reassembled many times with no effect on the seal, however brass is a soft material and susceptible to distortion, cracking, cross threading, etc. when over tightened. See diagram K.1 for more information.

How to flare end of tube?

3) Flare end of tube with a 45 0 flaring tool. a. Measure flare diameter. b. Examine flare for excessive thin out. 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight. 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.

What are all-brass fittings?

These all-brass fittings feature a vibration resistant construction that is UL listed and meets SAE J512 and SAE J513 requirements. The metal to metal seal resists mechanical pullout and is designed for high pressure service.