What is Type X gypsum wallboard?
FIREBLOC Type X wallboard is used as a covering material for interior walls and ceilings in residential and commercial applications that often require specific fire rated assemblies. It is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces.
What is Firecode Type X drywall?
The 5/8-inch, “fire-code” drywall (called Type X) increases a wall’s fire rating to a minimum of 1 hour, from the 30-minute rating for standard ½-inch drywall. And it’s not just thickness that makes the difference. Type X has a denser core and contains glass fibers that keep it from crumbling in the heat.
What is the difference between Type X and regular drywall?
Regular drywall has naturally occurring fire resistance due to the presence of gypsum in the core but is not fire rated. Type X drywall has special core additives that allow it to be used in fire rated designs and usually comes in 5/8” thickness.
What is fire rating Type X?
Surface Burning Characteristics: CertainTeed Type X Gypsum Board has a Flame Spread rating of 15 and Smoke Developed rating of 0, in accordance with ASTM E 84, (UL 723, UBC 8-1, NFPA 255, CAN/ULC-S102).
Is all gypsum board fire rated?
All gypsum panels are fire resistant and produced in a range of thicknesses, core formulations and optional special performance enhancements.
What kind of drywall do you use for garage walls?
Fire resistant drywall is made with glass fibers in an extra-thick design. This makes them ideal for use in utility rooms, garages and areas near a furnace or wood stove. Prevents the spread and speed of fire. Generates less smoke than traditional drywall.
What are the different types of gypsum board?
The different types of gypsum board generally available in the market are clued wallboard, backing board, core board, fire-resistant gypsum board, water-resistant gypsum board, and gypsum form board.
Is there special drywall for fireplaces?
Type X drywall is a common material used for wood stove installations. Type X is a gypsum-based drywall that is 5/8 inch thick and is installed on each side of a 2-inch by 4-inch wood stud, spaced 16 inches on center or spaced 24 inches on center.
What kind of drywall do you use around a fireplace?
Fire-rated Drywall Type X The drywall has a total thickness of 5/8 inches and is reinforced with glass fibers to help it retard fire.
What kind of drywall goes under a stove?
How thick should the drywall be in a garage?
What Type of Drywall Do You Use in a Garage?
|From the residence and attics||Not less then 1/2 inch gypsum board, or equivalent applied to the garage side|
|From habitable rooms above the garage||Not less than 5/8 inch Type-X gypsum board or equivalent|
Do you need fire rated drywall in garage?
A: First, fire-rated systems are only required if the garage shares a wall or a ceiling with the home. If you are doing repairs in the garage you should replace with like materials, but remember it is the wall system that is fire rated not the product itself.
Do you need special drywall for garage?
Standard drywall panels contain compressed particles of gypsum covered with thick paper. That’s fine in your home, but unless you’re finishing your garage as a living space, complete with insulation and a heat and air system, moisture-resistant drywall is preferable.
Are there different grades of drywall?
However, other types of drywall come in different thicknesses; the most common are 1/4 inch, 3/8 inch, 1/2 inch and 5/8 inch. The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard.
What is the difference between Type X and Type C gypsum board?
Type X is typically 5/8″ thick.
What is Type X sheetrock?
– Utility rooms, – Basements, – Furnace rooms, – Wood stove rooms, and – Attached ceilings and walls near living areas.
What is Type X gybsum board?
designated as “type X” gypsum wall-board. It reads: “Type X (Special Fire-Retardant) designates gypsum wall-board complying with this specification that provides at least one-hour fire retardant rating for boards 5/8″ (16 mm) thick, or ¾-hour fire retardant rating for boards ½” (13 mm) thick, applied to a partition in single-layer nail ap-
Is gypsum board and drywall the same thing?
They are all essentially the same thing, but different English-speaking countries use different names for what is almost the same item, although not always. Once again, gypsum boards are used in drywall, so the two are not precisely the same item. The reason they call it “drywall” is because the product is dry and ready for painting right away.