Can Plantronics CS50 connect to computer?
Plantronics PerSono Suite software provides the link between your CS50-USB headset and compatible softphone applications on your computer. PerSono Suite software provides the ability to remotely detect and answer/end a call from your softphone application via the headset call control button.
How do I setup my Plantronics CS50 headset?
Plantronics CS50 and CS55 Wireless Headset Setup WITH Headset…
- Step 1- Connect AC power.
- Step 2- Pair your CS50 or CS55 headset to the charging base.
- Step 3- Plug in the included phone cord.
- Step 4- Plug into the headset port.
- Step 5- How to use your headset.
How do I connect my Plantronics wireless headset to my Cisco IP Phone?
How to Install Plantronics Wireless Headsets with Cisco Phones
- Install the handset of the phone into the Plantronics Telephone Interface Cable.
- Install the headset base unit into the handset port of the phone. Leave the “headset port” empty.
- Answer/End calls by pressing the call control button on the headset.
Do Plantronics headsets work with Cisco phones?
Plantronics has a wide variety of products made exclusively for Cisco IP phones. Most Cisco IP phones have a dedicated headset port built-in which you can plug a headset directly into. Please see our Direct connect Cisco headset page for the latest headsets recommended for your Cisco phone.
What is an EHS cable?
An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.
How do I pair my Plantronics CS50 headset to my phone?
Press and hold both the + and – buttons on the back of the charging base until the red light on the front of the base starts to flash. Let go of both buttons. The red light should continue to flash. Push in the mute button (see below) until a green light appears on the headset, then release the button.
How do I sync my Plantronics headset to base?
To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.
How do I pair my Plantronics headset with base?
Place the charging base into pairing mode. To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode.
How do I setup the Plantronics CS50 or CS55?
How to setup the Plantronics CS50 or Plantronics CS55. 1 1. Press both the talk button (14) and the mute control button (15) on the headset for 5 seconds. 2 2. When the talk indicator light (17) on the headset blinks, release both buttons. 3 3. Press the talk button again. 4 4. Next reset the base unit by disconnecting the AC power adapter (24a)
How do I connect my existing telephone to the CS50?
Unplug the “Handset” from the base of your existing telephone and plug it into the Plantronics CS50 base unit where it has the icon of the “Handset”.
How do I subscribe to my CS50 headset?
The Subscription process is as follows: Step 1: Return the CS50 headset to the headset base/charging cradle. Step 2: On the back of the base unit, press and hold both of the microphone (talk) volume buttons (+ and -) for a minimum of 5 seconds.
Are the CS50 and CS50 headsets interchangeable?
Although the CS50 and CS50 headsets look the same, they are not interchangeable. The Subscription process is as follows: Step 1: Return the CS50 headset to the headset base/charging cradle. Step 2: On the back of the base unit, press and hold both of the microphone (talk) volume buttons (+ and -) for a minimum of 5 seconds.