What is a swage in sailing?
Swaging is a process where tubular stainless steel fittings are essentially crimped onto rigging wire under high pressure. Swage fittings are popular for a number of reasons. Theyre cost effective (i.e. cheaper) and in northern latitudes they can last a good long time (15 to 20 plus years is not uncommon).
What is a swaged fitting?
Swage fittings are wire rope components other than swage or stop sleeves, that are attached to the wire by compressing, (swaging) the fitting on to the wire.
What is this piece of rigging called?
The basis of all rigging is the mast, which may be composed of one or many pieces of wood or metal. The mast is supported by stays and shrouds that are known as the standing rigging because they are made fast; the shrouds also serve as ladders to permit the crew to climb aloft.
What is the purpose of swaging?
A swage is the shaped tool used to transform an object’s shape into the desired form by bending or shaping. Swaging is used in the metalworking field, known as metallurgy, to serve a variety of purposes. As a noun, swaging can transform a piece of metal into a desired shape through pressure or hammering.
What is the difference between a swage and a reducer?
The swage nipple and reducer raw materials are different: The raw materials of reducers is seamless steel pipes or steel plates,and the raw materials of swage nipple is round bar steel or billet steel.
What does IPS stand for in rigging?
This new grade was aptly named, “Improved Plough Steel” or I.P.S. for short. Improved plough steel became the de facto steel to be used until it was once again improved upon, to the point where it is actually difficult to find Plough Steel grade wire rope in inventory at a sling shop.
What is types of swage?
There are two primary types of swaging processes, however: tube and radial. The most common type, tube swaging is similar to extrusion in that it forces the workpiece through a die with a smaller diameter. In comparison, radial swaging involves the use of multiple dies.
What is the opposite of swaging?
Expand
Swage(or reduction): Swaging reduces the tube’s outside diameter (OD), allowing one part to fit into another. Expand: Expanding increases the OD of a tube and is the opposite of swaging.
What is a swage used for?
swage, Perforated cast-iron or steel block with grooved sides, used by metalworkers for shaping their work by holding it on the work (or the work on it) and striking with a hammer or sledge. Swage blocks are used in heading bolts and swaging bars by hand.
What are Sta-Lok swageless rigging terminals?
STA-LOK swageless rigging terminals are a range of high quality high performance wire rope fittings for 1 x 19, 7 x 7, 7 x 19, compacted and compact strand wire ropes. Suitable for both right hand and left hand lay constructions.
Why choose Sta-Lok wire rope rigging?
With more than 40 years in the marine industry Sta-Lok offers an extensive range of products for wire rope rigging. Sta-Lok mechanical fittings are hand fitted rather than machine swaged and can be fitted on site using simple hand tools.
Why choose Sta-Lok marine toggles?
Sta-Lok Marine Toggles are machined from high specification 316 stainless steel, our toggles are specifically designed to provide additional articulation. choose sta-lok. We believe that customer service is an extension of the quality products we produce.
What is a Sta-Lok?
Sta-Lok mechanical fittings are hand fitted rather than machine swaged and can be fitted on site using simple hand tools. The Sta-Lok terminal works under constant loading and variable shock loading, making it stronger than the wire rope fitted for the terminal.