How do I program my Cablevision remote to my TV?

How to Program Your Cablevision/IO remote to your T.V.
Note: Does not need to be set to your favorite channel.
Once done you should see the IO button turn on with a red to indicate the remote is ready to be programmed to your T.V.
The IO button will blink twice when the remote has saved the three digit code to confirm.

How do I program my old Cablevision remote?

How to Program your Silver Optimum TV Remote (with iO button)

Table of Contents

Power on your television.
Press and hold SEL and TV buttons for three seconds simultaneously.
After the iO button illuminates, point the remote at the TV and enter the three-digit code.
If the code is correct, the television will shut down automatically.

What are the codes for one for all remote?

OneForAll Remote code list

ADC – 0002 0006.
ADMIRAL – 0020 0226 0001.
ADVENT – 0176 0922.
ADVENTURA – 0174.
AIKO – 0058.
AIWA – 0195 0196 0227 0269.
AMTRON – 0053.
AKAI – 0105 0002 0077 0254.

How do I program my Telus remote to my Samsung TV?

Synchronize your remote to power on your TV and digital box at the same time:

Turn on your television and TELUS Digital box.
Press and hold TELUS/STB ; and then press OK.
Enter the code 977 on the number pad.
Press TELUS/STB and then TV to link the 2 devices.
Press Enter/Options.
Press Power.

What is the Telus code for a Samsung TV?

Enter code 9999 ; the green LED next to the Optik power button on the remote control will flash twice, indicating that the remote has been reset to the original factory settings.

How do you enter TV codes in a remote control?

First you need to “Turn The Device On”

Press the “TV” on your “Rogers universal remote”

Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)

Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)

How to find remote control codes?

First of all “Turn The Device On”

Now press and hold the “Setup” button

Enter the “9-9-1” (three digit) code

Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

How do I find the remote control code?

Press and hold the “TV”,”DVD” or other device button for 5 seconds until the LED flashes twice and remains lit.

Find the programming code for your TV (or other device) in the code lists and enter it using the number buttons.

Point the remote control at your device and press the “POWER” button. The device should turn off.

Where can one find direct TV remote control codes?

Point the remote at your Genie HD DVR,Genie Mini,or Wireless Genie Mini.

Press and hold the MUTE and SELECT buttons while continuing to point the remote at a Genie device.

Use the buttons on your Genie remote to enter code 961.

Press the channel up button once.

Press Enter.

Select OK when the TV screen displays Your Remote is now setup for RF .