How do you winterize an old outboard motor?
Winterizing Your Outboard Motor
- Drain the crankcase oil (Four-stroke motors)
- Install a new oil filter (Four-stroke motors)
- Filling the crankcase with new oil (Four-stroke motors)
- Changing the lower unit gear oil.
- Stabilizing the fuel.
- Flushing the outboard with antifreeze.
- Fogging the cylinders.
How do you winterize an old 2 stroke outboard motor?
Fog the Engine
- Remove the engine cover and find the carburetor’s air intake port.
- With the engine running, spray a small amount of fogging oil into the intake. The engine will want to die, but keep it running by opening the throttle.
- Continue to fog the engine until it dies.
Do you have to winterize a 2 stroke boat motor?
Regardless of the season, you should winterize your outboard anytime it isn’t going to be used for more than a month.
How do you winterize a two stroke outboard?
Connect Earmuffs and Warm up the Engine
- Attach a pair of ear muffs or flush muffs to the water intake ports on the lower end of the unit and connect it to a hose.
- Turn the water on and start the engine.
- Let the engine warm up for about 5 minutes to treat the entire engine with stabilized gas mix.
Does a 2 stroke outboard need to be winterized?
What happens if you don’t winterize an outboard?
You’ll want to learn from these mistakes. If You Don’t Winterize Your Boat, Here’s What Happens: Water freezes and expands and can damage anything it’s trapped inside. Water may seep into unprotected spaces to do this. Acidic and corrosive wastes, salt and corrosion buildup can damage delicate parts in engines.
Do I need to fog my 2 stroke outboard?
The metal surfaces within the powerhead’s cylinders need to be protected against corrosion. Spraying fogging oil into the cylinders will provide a coating over them that’s effective against condensation and corrosion.
Do you need to winterize an outboard motor?
When winter approaches and you won’t be using your boat anymore, do you have to winterize an outboard motor? If you want your engine to start in the spring and last you many years and plan on not using your engine all winter, you do have to winterize an outboard motor.
How good are Johnson outboard motors?
Good recommendations spread and 7,000 of the motors went to customers in 1923. Johnson was the first to introduce the heavy outboard engine in 1926. It lifted light planes up on a plane at 16 plus miles per hour and some 4-5 knots faster than most thought an outboard was capable of.
How to winterize Evinrude ETEC?
Evinrude E-TEC outboards are, by far, the easiest motors to winterize. If you have one of the E-TEC G2 motors, you simply back your boat into the water, or hook up a hose for cooling.
How do you winterize an outboard boat motor?
To winterize your outboard motor, you only need a few simple tools. Although one piece of specialized equipment you should invest in is an outboard motor flushing device. You’ll also need some fuel stabilizer and a can of fogging oil. West Marine walks you through how to winterize your motor and why it’s important.