What does a track bar do in a Jeep?
What Does a Track Bar Do? The track bar is what maintains the axle’s perpendicular alignment with your Wrangler when viewed from the front or rear. Without it, your axle will not be tame and may drift off to one side or the other, causing steering issues.
How important is a track bar?
The track bar is the item that truly “locates” your vehicle. It orients the vehicle and is super important for alignment and geometry. The build quality of your track bar is very important to overall performance of your suspension and steering. This applied to factory and highly modified custom vehicles.
What happens when a track bar goes bad?
Since the track bar is supposed to be a stabilizer for the vehicle suspension, when it comes loose or has broken, it will cause the front end to float and create a “wobbling” sensation. This is a serious safety issue as it can cause the vehicle to spin out of control if it becomes uncontrollable.
Can I drive without track bar?
Death Wobble aside, any driving you do without your trackbar can cause serious damage. The only thing left holding your axle under your vehicle are the control arm mounts, which are supposed to move up and down, not side to side.
Do you need an alignment after replacing track bar?
Well-Known Member. For a lift with fixed control arms there is no need for an alignment after instal, if you install an adjustable track bar you are just centering the axle that you install it on, no need for an alignment either.
How do you adjust the track bar on a 2000 Jeep Cherokee?
if it’s an adjustable, then just unbolt the frame end from the bracket, then have someone inside to turn the steering wheel one way or the other, that will move the jeep body back and forth over the axle. when it looks centered, adjust the track bar until it bolts back into the bracket.
Can I drive my Jeep without the track bar?
Without a trackbar your front axle is going to track allover the road. It is very dangerous to drive without a trackbar at all.
What happens if your track bar breaks?
How much does it cost to replace a track bar?
The average cost for track bar replacement is between $305 and $328. Labor costs are estimated between $87 and $109 while parts are priced at $219. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Why does my Jeep shake at 40 mph?
That steering wheel shake is absolutely definitely caused by a tire problem, as in a bad tire or an improperly balanced tire. Even if the tire was just balanced. Not many tire shops spend enough time to get tires balanced as well as the TJ requires.
What does adjusting the track bar do?
The track bar is located underneath the rear of the car. By raising or lowering the right side of the bar, a driver can alter the position of the rear axle in relation to the car’s centerline. Any changes affect the weight distribution of the car and how it moves through the corners on the track.
Do you need an alignment after replacing a track bar?
You won’t need an alignment… an adjustable trackbar helps to center the axle after lifting. It does not change the alignment of the tires.
When should I replace my track bar?
Signs your track bar needs to be replaced include: The steering wheel needs to be turned further. The vehicle is hard to turn. The car pulls to one side.