Do I need an Epson maintenance box?
The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it.
Can Epson maintenance box be reused?
Caution: Do not reuse a maintenance box that has been removed and left uninstalled for more than a week. Keep the maintenance box away from direct sunlight. Note: You cannot print or clean the print head while the maintenance box is full, but you can perform tasks that do not require ink, such as scanning.
Can you reset Epson maintenance box?
You may temporarily remove this maintenance message by using the Maintenance Reset Utility. The Maintenance Reset Utility can only be used once and will allow printing for a short period of time.
Can I print without maintenance box?
When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage. However, you can perform operations that do not use ink such as scanning.
How do I reuse my Epson maintenance tank?
Fold 3 paper towels together to loosely fit in the bottom of the empty tank (replace ink soaked pads every time the chip is reset to avoid overflow). Reattach the plastic grid, making sure it fully snaps onto the base with thick “Epson” end facing the outside (same way it was removed).
How do I know if my Epson maintenance box is full?
You can check the status of your maintenance box using your product’s LCD screen.
- Press the home button, if necessary.
- Select Maintenance > Maintenance Box Service Life and press the OK button. You see the remaining ink capacity of the maintenance box.
- Press the OK button again to exit the screen.
What does Epson maintenance tank do?
It stores the ink that gets flushed from the system during print head cleaning. It’s compatible with the Epson EcoTank models ET-2700, ET-2750, ET-3700, ET-4750, ET-M1170, ET-M1180, ET-M2170, ET-M3170, and ET-M3180. Your printer and its software will let you know when the maintenance box needs to be replaced.
How long does a printer maintenance box last?
In general, you should update your printer maintenance kit every one to two years.
Can you empty a maintenance box?
Do not remove the maintenance box or its cover except when replacing the maintenance box; otherwise, ink may leak. Do not touch the green chip on the side of the maintenance box.