How do I set up my TalkTalk YouView box?
Setting up your TalkTalk TV Box
- Insert the power supply. Insert the power supply into your TalkTalk TV 4K Box and plug into the wall.
- Insert HDMI cable.
- Connect TV aerial.
- Turn on the power.
- Select source input from your TV remote.
- Follow step by step instructions on-screen.
Why is my TalkTalk YouView box not working?
If your TalkTalk TV box won’t turn on, the first thing to do, as obvious as it sounds, is to check the power cables are all connected correctly and that there’s power going to the box. You should also check the power supply by plugging something else into it, like a lamp, to make sure there’s no fault there.
How do I connect my YouView box to my TV?
Connect one end of the HDMI cable to the HDMI socket on your YouView+ box and the other end to one of the HDMI sockets on your TV. Now switch on your TV and choose the source that corresponds to the socket you connected to (e.g. HDMI1 if you connected the cable to the HDMI 1 socket).
Where do I find YouView settings?
Settings. To access settings, press the Youview / Menu button and pressing the up arrow to Settings, then use the arrow keys to move back and forth through the menu options.
Why is my YouView box not connecting to the internet?
Restart your router The simple old trick of restarting your router can help resolve this issue. Switch it off at the plug for 30 seconds and turn it back on. Give it a minute or two to warm up then check if you’re reconnected.
How do you reset a TalkTalk YouView box?
Resetting your TalkTalk TV Box to factory settings can help fix some issues….TalkTalk TV Box
- Depending on which remote you have, press the Menu or youview button.
- Press the up arrow to select Settings.
- Select Factory Reset.
- Select Reset.
Why is my YouView box not connecting to the Internet?
Can I connect my TalkTalk YouView box wirelessly?
It’s not possible to connect the box via WiFi in principle, but some have managed to do so using routers/ bridges. Powerline plugs are the preferred option.
How do I enable YouView?
To enable/disable YouView
- Press the HOME button, then select [Settings] — [Watching TV] — [Channels] — [Channel setup] — [YouView setup].
- Select [Enable YouView] or [Disable YouView], and then select [Yes].
- Follow the set-up procedure.
Where is the Settings button on my YouView remote?
There are no settings button on the remote all settings are on the screen via your blue youview button on the remote. Dave Gunning said: There are no settings button on the remote all settings are on the screen via your blue youview button on the remote.
Can I get TalkTalk TV without an aerial?
TalkTalk’s TV offering is in the form of a basic YouView box with up to 80 Freeview channels, including 15 in HD. Freeview channels are subject to location and you will need a roof aerial in order to be able to receive them.
Does my YouView box need to be connected to my router?
Not all YouView boxes are Wi-Fi enabled. If they are not Wi-Fi enabled, they need a wired Ethernet connection to connect the internet, so that we can give you the best quality experience. If you do not have a Wi-Fi enabled YouView box, we recommend using powerline adapters if your router is too far from your box.
How do I connect my YouView box to Wi-Fi wirelessly?
If you’re trying to connect your YouView box to your wifi, then unfortunately it isn’t possible for you to connect to it via a wireless connection. This isn’t inbuilt into a Youview box like it is with other TV watching options out there. However, a powerline adapter can provide a solution.
How do I soft reset my YouView box?
Press and hold the reset button on the right-hand side of the box. Plug the power cable back in whilst still holding the reset button – continue to hold the reset button down, do not release it yet. Within three seconds press and hold the power button on the front of the box and hold both buttons.
How do I restore my YouView box to factory settings?
Performing a factory reset
- Make sure your box is connected to the internet.
- Open the Menu.
- Select Settings*
- From Information & reset select Factory reset.
- Select Reset.
- Enter the numbers you see on screen to confirm you want to reset your box.
- Your box will now reset itself and we’ll walk you through the setup again.
Can you set up YouView without an aerial?
You will need an aerial to enable YouView and to have retuned your TV to a UK digital TV signal at least once, thereafter if the aerial is removed you will only be able to watch On Demand and use the search features (Internet required).
Can you use YouView without an aerial?
Is there a user manual for TalkTalk YouView set-top boxes?
User Manuals, Guides and Specifications for your TalkTalk YouView Set-top boxes. Database contains 1 TalkTalk YouView Manuals (available for free online viewing or downloading in PDF): Setup manual .
What will the new TalkTalk TV products powered by YouView be?
So the “new TalkTalk TV products powered by YouView” will probably feature something which is basically the same as a BT Pro unit but in a different box (with one rounded corner? ) and which doesn’t record (plus a new remote control?) (If so this might keep BT happy as their box could be seen as superior to this new TalkTalk box.)
Why won’t my Humax YouView box work with TalkTalk boosts?
So, by the sound of things, a YouView box sourced via retail not being able to play with TalkTalk’s boosts has less to do with any perceived hardware limitation on the part of the (Humax DTR-1000, at this point in time) YouView box and more to do with TalkTalk’s provisioning and router configuration…
How do I set up YouView on my box?
Make sure the power switch on the back of the box has been turned on: The power light on the front of the box should now turn on. Press the button on the front or top of your box (depending on model) and you should see the YouView set up screen: Just follow the on screen instructions and you’re good to go.