How do you program a DMP panel?
HOW DO I GET INTO PROGRAMMING? Reset the control panel by shorting the J16 panel reset jumper for two seconds, then enter 6653 (PROG). If you are working with an XR100, XR200, or XR500, hit the CMD button. The keypad will now show PROGRAMMER.
How do I reset my DMP alarm panel?
Reset the control panel by shorting the RESET header or pressing the RESET button, depending on the panel. Then, at a keypad, press 8-1-4-4 (W-A-L-K) (then press CMD on XR panels). Press CMD until the WLS option is displayed, and select it.
How do you silence a DMP alarm?
While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM SILENCE. 2. Press the Select key under SILENCE to stop the bell or siren.
How do I update DMP firmware?
Press and hold the Load switch on the panel. While holding the Load switch, press and release the Reset switch, then release the Load switch. 3. Press and release the load button on the Model 400 to initiate the firmware update.
How do you reset an alarm sensor?
You can reset your alarm system by powering it down and then powering it back on. This is what is known as a power reset. To power down the system, the backup battery must be disconnected, and the transformer must be unplugged. Then reconnect the battery and transformer to power it back on.
What is DMP easy connect?
Most firewalls don’t block outbound communication, but most of them block inbound communication from “outside.” When those inbound requests are blocked, EASYconnect™ by DMP is the essential strategy in communicating to your security panel without having to reconfigure your network.
What is the latest version of DMP Remote Link?
DMP has released the following Technical Update for all Remote Link software, with Version 2.12. Effective June 22nd, 2021, all Remote Link™ software will be manufactured with Version 2.12. Remote Link 2.12 now supports XR, XT, and Com Series firmware Version 212.
What do the DMP feature codes mean on my panel?
DMP Feature Codes All XR Series panels use a number to access certain features. Some of these features include the programmer menu, diagnostic menu, and the walk-test function. Most of these codes have a word-equivalent that can be spelled out using the keys on the keypad:
Are all DMP panels the same?
COMMON TROUBLESHOOTING Most DMP panels, regardless of model, operate pretty much the same way. That means that many of the troubleshooting steps taken to resolve an issue are the same, no matter which panel you happen to be servicing.
How do I access diagnostics on my DMP control panel?
Diagnostics: To access diagnostics on DMP control panels, reset the control panel by momentarily placing a jumper on J16 and then remove it where it’s only placed on one pin. At a keypad, press 2-3-1-3 (D-I-A-G).
Where can I find product guides for DMP installations?
DMP Guides—View all of DMP’s product guides on the DMP website. 5. Email Pics—Take a picture of an installation to send to someone who can help you.
https://www.youtube.com/watch?v=daVfQYiK1Js