How much is Optimum No Rinse per gallon?
Add 1oz of Optimum No Rinse to 2 gallons of water. This equals 30ml in 7.5 litres. Soak a clean and plush microfiber towel in the solution. Wipe a small section of the car in a straight line.
How do you mix optimum without rinse?
Dilution
- 16oz bottle: 15oz distilled water 1 oz ONR concentrate.
- 32oz bottle: 30oz distilled water 2oz ONR concentrate.
What is ONR in auto detailing?
Optimum No Rinse Wash and Shine (ONR) is another amazing product from Optimum. This remarkable formula has the ability to help you safely clean your vehicle’s entire exterior without the need for rinsing down your paint afterward.
Can Optimum No Rinse be used as a waterless wash?
Edit: Got a response from optimum: thank you for you for your interest in Optimum products. Yes, No Rinse can be used as a waterless wash mixed at 10 oz per gallon of water. There is no performance advantage between No Rinse at waterless ratio and Opti-Clean other than Opti-Clean is ready to use.
Does Optimum No Rinse remove water spots?
ONR also softens the water, removing minerals that can damage your paint and leave behind unsightly water spots.
Does Optimum No Rinse leave residue?
Optimum No Rinse leaves no residue and requires no rinsing. If you’re short on time but still like to wash your car yourself, ONR is a lifesaver.
How do I use Optimum car wash?
Directions
- Rinse car to remove loose dirt.
- Pour wash concentrate into a bucket and mix with water (use 1 oz per gallon).
- Wash car with a sponge or wash mitt.
- Rinse car, then dry immediately with Optimum Drying Towel. Rinse hands after use.
Can I use tap water with ONR?
Most ONR users use 1oz of ONR to 1 gal of water for washing purposes. Tap water is fine to use. The only downside to tap water over say DI water is that the polymers in the ONR will bond with the minerals in the tap water while in treated water it won`t.
Is Optimum No Rinse toxic?
None. Section 313 toxic chemicals: None.
How do I use Optimum FerreX?
Simply wash the desired surface with Optimum Car Wash, rinse thoroughly, spray FerreX directly onto the surface and allow 1-2 minutes of dwell time. Agitate with a sponge or brush as needed and rinse off with a strong jet of water. Size: 500ml (17 oz.)
Does Optimum No Rinse have wax?
Optimum No Rinse & Wax does not require rinsing with a hose since there are no soapy surfactants to wash off into the storm drains. The added carnauba wax provides weeks of UV protection….
| Brand | Optimum |
|---|---|
| Item Form | Wax |
| Item Weight | 2.29 Pounds |
Do I need distilled water for ONR?
I use distilled water for ONR as well as for diluting the various concentrated cleaners (Meguiars APC, Totally Awesome, Simple Green, etc.) When a total wipedown is required, a capfull of ONR in a gallon of distilled water will easily do two cars and eliminate water spots.
How long does Optimum No Rinse last?
Some quick math: at 1 oz per use, a 32 oz bottle will last you 32 washes… and although Optimum recommends using 2 gallons of water, in my experience you can easily get away with 1 gallon for most vehicles. That bumps it up to 64 washes per bottle.
Should you dry your car after washing it?
You should always dry your car after washing it to prevent water spots accumulating on the surface. Water spots can corrode your car’s paint and are difficult to remove. Never air dry your car after washing, instead, use a clean, plush microfiber towel.
Why does my car still look dirty after washing?
To conclude, if you are noticing your car is remaining quite dirty even after washing, you are likely dealing with hard water, an ineffective wash process, or simply not enough soap.
Why choose optimum car wash?
Optimum Car Wash is designed to clean the toughest automotive grime, while maximizing the durability of your wax or sealant. Some car wash products, as well as automatic car washes can remove the UV protection and wax, leaving the paint unprotected. Optimum Car Wash is designed to remove dirt and grime without removing the protectant.
How do you dilute optimum no rinse?
Optimum No Rinse can be diluted to 16:1 (16 parts water, 1 part ONR) to produce a much more lubricated, and hence safer quick detailer spray. How to Use Optimum No Rinse as a Quick Detailer Dilute the product in a spray bottle to 1:16 (16 parts water, 1 part ONR). Spray onto the surface and wipe with a plush, clean microfiber towel.
How do you use optimum no rinse on a car?
How to Use Optimum No Rinse Pre-rinse the car if it is very dirty or any loose mud or debris is on the car. You may also use a snow foam or other pre-wash product at this stage if you need to. Add 1oz of Optimum No Rinse to 2 gallons of water.
How much water does it take to make a car wash?
It is highly concentrated and only requires 15ml or less per 4-5 liters of water to produce the necessary cleaning and foaming. Optimum Car Wash contains only bio-degradable ingredients to make it safe for consumers and the environment.