What is a good trigger pull weight for a pistol?
Trigger Pull Weight for a Handgun > As a general rule, a serious use pistol should have a trigger no lighter than 4 pounds and ideally no more than 6 pounds.
What makes a good pistol trigger?
A gun with decreasing pull weight is slightly harder to shoot, and those with a “hump” in their pull are (at least for me) the hardest of all to shoot. A good trigger will have as consistent a pull weight as possible, within the limitations of the gun’s design and the shooter’s desire.
What is the Glock trigger pull?
All full-sized and compact Glocks have a trigger pull measuring approximately twenty-four newtons, or 5.39 pounds, versus twenty-eight newtons of force, or 6.29 pounds of force for smaller, concealed carry Glock handguns.
How many pounds is a stock Glock trigger spring?
Trigger Spring for Glocks GEN’s 1-4.
What is the best trigger pull?
Trigger weight is the amount of force that is required to pull the trigger, which fires the gun. Experts in Glock pistols say that the ideal trigger weight is somewhere between 4 and 6 pounds, with variances on either side depending on personal preference and the firearm you are shooting.
Where should your finger be on a pistol trigger?
Unless the shooter is ready to aim and shoot at a target, their trigger finger should not be on the trigger. The finger should be rested above the trigger along the side of the weapon on the slide.
What is good trigger discipline?
Trigger discipline is a state of mind where the shooter keeps his or her finger outside of the trigger guard area, usually pressing it against the frame above the trigger area and parallel with the barrel, until ready to fire the gun.
What is the trigger pull on a Glock 19?
The trigger pull was measured at around 4.5 pounds compared to my stock Gen 4 Glock 19, which measured at 5.6 pounds, but it felt noticeably lighter due to the gradual weight increase. I want to note that the trigger did not feel mushy, rather it felt precise and repeatable with a predictable uptake and break.
How many pounds of pressure does it take to shoot a gun?
When the firing pin in a firearm strikes the primer, it ignites the powder inside the case, creating an explosion that generates a large amount of pressure, often exceeding 50,000 PSI (344.7 MPa). This pressure in turn pushes the bullet out of the case mouth and into the barrel.
What is the trigger pull on a Glock 20?
How much of my finger should be on the trigger?
There’s a good way to figure out what the optimal amount of finger to use on the trigger is. With the trigger fully pressed to the rear, look down at the second joint of your index finger. It should be at or almost at a 90 degree angle.
What is the factory trigger pull on a Glock?
What gun has the lightest trigger pull?
One has a 24E (HIPERTOUCH Elite AR15 Match Trigger Drop In) and another has a 243G (HIPERTOUCH AR15 3-Gun Trigger) in it. By far one of the most user friendly and easily tunable AR triggers out there IMO. If the OP wants something close to the light trigger weight in his REM 700 , then the Hiper touch will fit the bill.
How to pull a shotgun trigger?
Pull the stock and take a look at it. Some release triggers are very easy to convert back to pull. If you could post a good pic or two of the trigger works, I could probably tell you if it’s easily done or not.
How to set a Kimber trigger pull?
Intended Use. Competition,precision shooting,hunting,rugged hunting,harsh environments,target shooting,varmint hunting.
How much pressure does it take to pull a trigger?
The pounds of pressure required to manipulate the trigger — trigger pull weight — is surprisingly small and generally ranges from 1.5 to 8 lbs. Mastering trigger control takes time and dedication. In that regard, “pulling” the trigger is no easy task.