Where is the reset button on a Ruud silhouette furnace?
Best Answer:
- The reset button on a Ruud furnace is located at the end of the thermostat wire that comes out of the back right of the furnace.
- It is not possible to reset the furnace remotely like many newer models and it can only be reset by physically pushing and holding in this button for approximately 30 seconds.
How do you light a Ruud silhouette furnace?
The furnace features an automatic ignition device, so there is no need to manually light any pilot burner. Turn on the electric power to the Silhouette furnace, set the thermostat to the setting of your choice and close the control panel door. Remove the blower compartment access door to clean or change the filters.
How do you read a Ruud furnace model number?
Find the letter in the middle of the serial number. The first two numbers after it are the week of manufacture, and the third and fourth numbers after the letter are the year of manufacture. The month and year of manufacture is also indicated at the upper right of the data plate.
How do you reset a Ruud silhouette 2?
Remove power from the furnace and take the filter out. Clean the filter with a vacuum or cold, soapy water and dry before putting the filter back in the furnace. Push the red “Reset” button on the control panel before restoring power.
Why does my Ruud furnace won’t ignite?
If the igniter fails or cracks, the furnace won’t heat. To determine if the igniter is faulty, remove the igniter and inspect it for cracks. If the igniter is cracked, replace it. If the igniter is not cracked, use a multimeter to test the igniter for continuity.
Where is furnace reset button?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
What size is my Ruud furnace?
You can determine the size in tons of your Ruud HVAC system by examining the model number on the data sticker at the side of the a/c condenser (outdoor unit). Look for the second cluster of digits of the model number. It will be a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands.
How can you tell the age of a Ruud?
Rheem/Ruud
- Style 1 starts with a letter followed by the week and year of manufacture. W011012345 would be manufactured in January of 2010.
- Style 2 follows the letter in the middle of the serial number with the week and year of manufacture. For example CB5D302F0998 would be manufactured in March of 1998.
Where is the reset button on a gas furnace?
Does a gas furnace have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
https://www.youtube.com/watch?v=447V31BQPbo