Does Sony DSC-H300 take video?

Posted on by Mary Andersen

Does Sony DSC-H300 take video?

This Sony DSC-H300 digital camera’s 20.1-megapixel, 1/2.3″ Super HAD CCD sensor enables you to take sharp photographs and video footage of subjects and scenes.

What year did the Sony DSC H300 come out?

February 2014
Sony H300 Overview First introduced in February 2014 , Sony Cyber-shot DSC-H300 is a 20.0MP Small Sensor Superzoom camera with a 1/2.3-inch (6.17 x 4.55 mm ) sized CCD sensor, built-in Image Stabilization and 35.0x zoom 25-875 mm F3-5.9 lens.

How do I change the aperture on my Sony DSC-H300?

aperture value.

  1. Set the mode dial to (Manual Exposure Shooting).
  2. Press on the control button.
  3. Press / to select the desired shutter speed, and press / to select the. aperture (F value). Select a shutter speed from 30 seconds to 1/1500 seconds.
  4. Shoot with the shutter button.

Do you lose quality with clear image zoom?

However, Sony’s Clear Image Zoom allows you to not digitally zoom like an old phones pinch to zoom feature, where your image starts getting blurrier in a bad way and lose quality tremendously but to digitally zoom into the image or video using the camera’s sensor.

Does clear image zoom reduce quality?

In clear image zoom there’s nothing you cannot do in post production. Same for video shooting. Unfortunately, even if you shoot 1080p, and apply digital zoom, the quality degrades quite noticeably. So it’s much better to stop shooting, switch to APS-C mode (a custom button will work) and then resume.

How do I change the aperture on my Sony Cybershot?

Press on the control button. Press / to select the desired shutter speed, and press / to select the aperture (F value). Select a shutter speed from 1/2000 seconds to 30 seconds. When zoom is set fully to W, you can select an aperture of F3.

How do I change the exposure on my Sony Cybershot?

How to Change the Shutter Speed on a Sony Cyber Shot

  1. Turn your camera on.
  2. Rotate the dial to the “S” position for Shutter Priority.
  3. Adjust the shutter speed to your desired value by rotating the dial on the top rear of the camera.
  4. Depress the shutter button on the top of the camera to return to shooting mode.