What are Type 53 staples?
The 53 Series Staples come in leg lengths of 6mm, 8mm, 10mm, 12mm, 14mm and 16mm. All leg lengths are galvanised; have a crown width of 11.35mm; and come in boxes of 5,000 staples. The 53 Series Staple Selection Pack comes with 2,000 x 6mm; 2,000 x 8mm; and 2,000 x 10mm staples.
Can you scan documents with staples in them?
With a Staples store always nearby, we’re your office on the go. You can access the cloud, make copies, scan documents, send faxes, shred files and use the computer rental station at a Staples location.
How do you staple in the middle?
- Put the paper on a soft but firm surface like a piece of Styrofoam, or even a couple layers of corrugated cardboard (like from a cardboard box).
- Open the stapler. Position the head where you want the staple to go through the paper.
- Remove the paper and staple from the soft + firm surface.
What is the crown on a staple?
The crown’s width defines the staple’s size. All staples have “crowns,” but they vary by width, by the gauge or thickness of the wire, and by how long their “legs” are. Staple guns, like crown staplers, can drive fasteners deep into wood to the depth of their two-pronged legs.
What are staple foods examples?
Staple foods are derived either from vegetables or animal products, and common staples include cereals (such as rice, wheat, maize, millet, and sorghum), starchy tubers or root vegetables (such as potatoes, cassava, sweet potatoes, yams, or taro), meat, fish, eggs, milk, and cheese, and dried legumes such as lentils …
What are Type 90 staples?
The type 90 is an 18 gauge staple and is quite a heavy type. The type A is of lighter type and may be of the kind used in the electric staplers and smaller pneumatic types.
Can you staple court documents?
Each individual document should also not be stapled or otherwise attached to other pages, unless the document is part of a multi-page document. If you are sending in multi-page documents, please make sure they are in the order you want them scanned and clip or staple them together in that order.
What are 18 gauge staples used for?
At 18-19 gauge, medium wire staples can be used for heavier upholstery, cabinet assembly, paneling, trim, sheathing, underlayment, siding and soffits. Heavy wire staples are the strongest, ranging from 15-17 gauge.
Are all staples the same width?
Unlike nails, staples are often sold by series, which doesn’t tell you much about size. Furthermore, staples are not “one-size-fits-most,” contrary to most categories of collated nails. Staples are instead measured not only by leg length and wire gauge, but also by crown width.
What are Upholstery Staples?
Almost any fine wire and medium wire staples can be used for upholstery, depending on your fabric. 20 and 22 gauge staples are the most common staples for upholstery. #7 series staples 22 Gauge, #8 (80) series staples 20 Gauge, and T-50 series staples 20 Gauge are commonly used for these applications.
What side do you put the staple on?
What does staple mean?
1 : used, needed, or enjoyed constantly usually by many individuals. 2 : produced regularly or in large quantities staple crops such as wheat and rice.
Which way do you staple landscape paper?
How To Staple a Document in Landscape Orientation at the Top, Left Corner
- Staple a Document in Landscape Orientation at the Top, Left Corner.
- Load Paper in Tray 4 / Bypass Tray (Short Edge Feed) and Then Specify the Bypass Tray as the Paper Source.
- Disable the Staple Productivity Mode.
What does gauge mean in Staples?
The gauge is the thickness of the staple, whereas the crown is the width. Medium Wire: Medium wire staples are generally measured in the 18 – 19 gauge range of thickness.
Why is staple outward?
As the legs hit the grooves in the anvil they are bent to hold the pages together. Many staplers have an anvil in the form of a “pinning” or “stapling” switch. This allows a choice between bending in or out. The outward bent staples are easier to remove and are for temporary fastening or “pinning”.
What size is 18 gauge staples?
These 18 gauge staples are available in a range of crown sizes including 3/16″, 7/32″, 1/4″, 5/16″, and 3/8″, with lengths ranging from 1/4″ all the way to 1 1/2″.
What kind of materials are staple wires and nails?
Answer. Explanation: Modern staples for paper staplers are made from zinc-plated steel wires glued together and bent to form a long strip of staples.
Are upholstery staples different?
Upholstery staples come in several different lengths. The most commonly used lengths are 1/4″, 3/8″ and 1/2″. I like to keep a box of each at my station at all times so I can quickly swap out sizes when working on different parts of a project.
What are Type 71 staples?
BEA type 71 series staples are the most popular fine wire staple used in the Upholstery trade and they can be used in any 71 series staple gun. They are 9mm wide and the leg lengths are between 6mm and 12mm.